Skip to content

Setup Telekom FTTH via PPPoE with Opnsense | Telekom Glasfaser durch PPPoE auf einer Opnsense einrichten

English

All can be found here too.

  • Interfaces -> other types -> VLAN (https://<your opnsense ip>/interfaces_vlan.php)
    • Create new VLAN-Interface:
      • Parent Interface:
      • VLAN-Tag: 7
      • VLAN Priority: 0
      • Description: telekom vlan
  • WAN-Interface (https://<your opnsense ip>/interfaces.php?if=wan):
    • Choose device pppoe
    • IPv4 Configuration: PPPoE
    • PPPoE Configuration:
      • Username: 0001@t-online.de
      • Password:
      • Servicename: telekom
  • Check:
    • System -> Gateways (https://<your opnsense ip>/system_gateways.php)
    • Remove all the gateways not named like WAN_PPPOE

Deutsch

Die Anleitung kann auch hier gefunden werden.

  • Schnittstellen -> Andere Typen -> VLAN (https://<IP Adresse der opnsense>/interfaces_vlan.php)
    • Erstelle neue VLAN-Schnittstelle:
      • Eltern Schnittstelle:
      • VLAN-Tag: 7
      • VLAN Priorität: 0
      • Beschreibung: telekomnvb vlan
  • WAN-Schnittstelle (https://<IP Adresse der opnsense>/interfaces.php?if=wan):
    • Wähle Gerät PPPoE aus
    • IPv4 Konfiguration: PPPoE
    • PPPoE Konfigurationn:
      • Benutzername: 0001@t-online.de
      • Passwort: <Persöhnliches Kennwort>
      • Dienstname: telekom
  • Prüfung:
    • System -> Gateways (https://<IP Adresse der opnsense>/system_gateways.php)
    • Entferne alle Gateways die nicht wie folgt benannt sind WAN_PPPOE